Universal Removable Motorcycle Exhaust Baffle

Simple to fit universal removable motorcycle exhaust baffle insert.
This DB Killer greatly reduces the noise levels from noisy motorbike exhausts, race cans or end cans if you have lost the baffle!

8 inches long (easily cut with a hacksaw if a shorter length is required).

Available with a 35mm, 41mm or 47mm external diameter end.

These baffles are ideally suited to inline 4 cylinder engine, conventional exhaust cans (CBR, GSXR, Fireblade, Bandit, R1, R6, Fazer etc) but can be adapted (and have been by many of our customers!) to fit a wide range and style of exhausts.

Universal motorcycle exhaust baffle benefits:

• Simple and easy to fit
• Available to fit 35mm, 41mm and 47mm diameter end cans
• Held in by a bolt so the baffle is easy to remove or install again (handy if your somewhere that does not have noise restrictions!)
• Can help get an un baffled motorbike exhaust through an MOT or quieten an exhaust down for a track day
• Easily shortened if a shorter length baffle is required (can be shortened with a hacksaw so no complicated or expensive machinery needed!)

The pictures below give an idea of the dimensions:
(please note - the measurements below are approx)

Fitting requires a small hole to be drilled in the exhaust can spout.

Although these universal baffles will fit many motorbike exhaust end cans, they are not suitable for some high level systems where the end spout is at a steep angle to the can body (e.g. the Honda VTR1000 SP1 and SP2, see image on the left below). They are more suited to straighter end cans (see image on the right below):